Frostmatic Function; Child Lock Function - AEG S92500CNM0 Benutzerinformation

www.aeg.com
8
SWITCHING ON THE WINE
CELLAR
To switch on the wine cellar :
1. Press the Mode button until the cor-
responding icon appears.
The wine cellar Off indicator flashes.
2. Press the OK button to confirm.
3. The wine cellar Off indicator goes off.
To select a different set temperature refer
to "Temperature regulation".
TEMPERATURE REGULATION
The set temperature of the wine cellar
and of the freezer may be adjusted by
pressing the temperature regulators.
Set default temperature:
• +10°C for the wine cellar
• -18°C for the freezer
The temperature indicators show the set
temperature.
The set temperature will be reached with-
in 24 hours.
After a power failure the set tem-
perature remains stored.

FROSTMATIC FUNCTION

To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
The FROSTMATIC indicator flashes.
2. Press the OK button to confirm.
The FROSTMATIC indicator is shown.
This function stops automatically after 52
hours.
To switch off the function before its auto-
matic end:
1. Press the Mode button until the
FROSTMATIC indicator flashes.
2. Press the OK button to confirm.
3. The FROSTMATIC indicator goes off.
The function switches off by se-
lecting a different freezer set tem-
perature.
HIGH TEMPERATURE ALARM
An increase in the temperature in the
freezer compartment (for example due to
an earlier power failure) is indicated by:
• flashing the alarm and freezer tempera-
ture indicators
• sounding of buzzer.
To reset the alarm:
1. Press any button.
2. The buzzer switches off.
3. The freezer temperature indicator
shows the highest temperature
reached for a few seconds. Then
show again the set temperature.
4. The alarm indicator continue to flash
until the normal conditions are re-
stored.
When the alarm has returned the alarm in-
dicator goes off.
DOOR OPEN ALARM FOR THE
WINE CELLAR AND FREEZER
COMPARTMENTS
An acoustic alarm will sound if the door is
left open for a few minutes. The door
open alarm conditions are indicated by:
• flashing Alarm indicator
• acoustic buzzer
When normal conditions are restored
(door closed), the alarm will stop.
During the alarm, the buzzer can be
switched off by pressing any button.

CHILD LOCK FUNCTION

To lock the buttons from unintentional
operation select the Child Lock function.
To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
2. The Child Lock indicator flashes.
3. Press the OK button to confirm.
The Child Lock indicator is shown.
To switch off the function:
1. Press the Mode button until the Child
Lock indicator flashes.
2. Press the OK button to confirm.
3. The Child Lock indicator goes off.
MINUTE MINDER FUNCTION
The Minute Minder function is to be used
to set an acoustic alarm at the preferred
time, useful for example when a recipe re-
quires to cool down a mixture for a certain
length of time, or when a reminder is nee-