EMPTYING THE WATER TANK
- -
When the water tank is full, the ambient light will flash red and the dehumidifier will turn off.
1.
Unplug the dehumidifier and place it on a flat, stable surface.
2.
Press both water tank buttons and lift off the top of the dehumidifier.
3.
Remove the water tank cover.
4.
Gently tip the water tank to empty it.
5.
When empty, replace the water tank cover and the top of the dehumidifier.
CLEANING & STORAGE
- -
WARNING: ALWAYS TURN THE APPLIANCE OFF AND UNPLUG
THE POWER CORD FROM THE ELECTRICAL OUTLET BEFORE
HANDLING OR CLEANING IT.
CAUTION: DO NOT ALLOW WATER OR OTHER LIQUIDS TO
RUN INTO THE INTERIOR OF THE APPLIANCE, AS THIS COULD
CREATE A FIRE AND/OR ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY ABRASIVE CLEANERS OR
SOLVENTS, AS THIS CAN DAMAGE THE APPLIANCE.
Do not attempt to clean the appliance in any other way
•
than that detailed by the manufacturer.
Clean the exterior surface of the appliance by wiping
•
it with a soft, damp cloth. Dry the appliance with a soft,
clean cloth.
English | 9 of 58