Specifications; Safety Warnings - Makita SD100D Betriebsanleitung

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Length of stroke
Strokes per minute
Maximum cutting capacities
Rated voltage
Standard battery cartridges
Overall length
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
This tool is intended for plunge-cutting of a drywall.
Wood can also be cut by installing a suitable saw blade.
Noise
The typical A-weighted noise level determined accord-
ing to 60745-2-11:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING:
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to 60745-2-11:
Work mode: cutting drywall (thickness 30 mm)
Vibration emission (a ) : 3.0 m/s
h
Uncertainty (K) : 1.5 m/s
Work mode: cutting chip board (thickness 15 mm)
Vibration emission (a ) : 5.5 m/s
h
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
Drywall
Wood
) : 77 dB(A)
pA
2
2
2
2
BL1015, BL1020B
239 mm
1.5 kg
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
5 ENGLISH
SD100D
6 mm
-1
0 - 6,000 min
30 mm
15 mm
D.C. 10.8 V
BL1040B
248 mm
1.6 kg