Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The Rec-Out output
The rear rec-out output sends high-level electrical audio signals in analogue form. These signals will not change
in sound and volume after the settings on the VR-120, but transmitted unchanged from the respective signal
source. This output is particularly suitable for recording devices such as tape recorder or cassette recorder. The
USB connection
The USB connection
See page 51 for a more detailed description of the USB front connector.
The line-in connector
The line-in connector located behind the magnetic cover at the front of the VR-120 processes electrical high-
level audio signals in analogue form. This connector is suitable for all external devices with analogue audio
output, like media players, iPod®, smartphones etc. (connection over headphone output). For the connection,
please consult the operating instruction of the external device. A suitable 3.5 mm cable is available in the ac-
cessory shop
The headphone connection
The headphone jack of the VR-120, located behind the magnetic cover on the front, allows you to connect a
commercially available headphone with 6.3 mm jack plug. A 3.5 mm jack adapter for smaller headphones can
be obtained from the accessory shop.
The loudspeaker outputs
The VR-120 is equipped at its back with two high-quality gold-plated terminal pairs for the connection of louds-
peaker cables. Cables can be connected either via banana plugs mounted on the cables (plug-in mounting) or
via the screwable terminal heads with the stripped loudspeaker cable (screw mounting).
51
Werbung
