Merach MR-R14 Bedienungsanleitung Seite 13

Step2: Install the Rail Connection Plate
A. Take out the Rail Connection Plate(#05), then lock 4 Hexagon Socket Flat Head Screws (#74)
through the holes of Foot Plate(#04) and Left/Right Rear Rail Assembly(#B/C) into the
corresponding pre-built nuts on the Rail Connection Plate(05), and then tighten it with the
Allen Wrench(#102).
#74: hexagon socket flat head screws M6×50×S4 *4
#102: Allen wrench S4 25×60×4 S4 *1
EN
Assembly Instruction
009