VEVOR RHF9021NS Bedienungsanleitung Seite 12

NOTION
Information contained in this manual is designed to assist you in the safe
operation of your tool. Some illustrations in this Manual may show details
of attachments that differ from those on your own tool.
ADJUSTING NAILING DEPTH
(Only Model RHF9021NS with depth adjustment on safety)
Disconnect tool from air hose before turning the adjuster thumb wheel on
safety.
To assure that each nail penetrates to the same depth, be sure that:
1. Air pressure to the tool remains constant (regulator is installed and
working properly), and
2. The tool is always held firmly against the work piece. If nails are driven
too deep or too shallow into the work piece, adjust the thumb wheel on
safety in the following order.
DISCONNECT ARI HOSE FROM TOOL
- 11 -