HEIDELBERG Energy Control Installations- Und Konfigurationsanleitung Seite 3

1. Introduction
1. Introduction
1.1. Legal provisions
The information contained in these documents is the property of FENECON GmbH. Publication, in whole or in part,
requires the written consent of FENECON GmbH.
Subject to changes and printing errors!
Abbildungen mit freundlicher Genehmigung der Firma Heidelberg (Amperfied) GmbH.
1.2. Qualification of the installing electrician
A qualified electrician is a person who has the necessary experience and training:
• Setting up, switching on, switching off, disconnecting, short-circuiting and repairing circuits and devices
• Standard maintenance and use of protective devices in accordance with current safety standards
• First aid/emergency care
• Current knowledge of local regulations, standards and guidelines
1.3. Symbols used
Before reading the manual, you should familiarize yourself with the different types of safety warnings. You should
also familiarize yourself with the importance of the safety warnings.
1.4. Darstellungskonventionen

This symbol indicates an imminent danger. If this danger is not avoided, it can lead to death or serious
injury.

This symbol indicates a potentially dangerous situation. If this dangerous situation is not avoided, it may
result in minor or moderate injury.

This symbol indicates a warning. Failure to observe this warning may result in damage and/or
destruction of the system.

This symbol indicates a note. It is recommended that the note be observed.
Table 1. Darstellungskonventionen
2 / 15 Installations- und Konfigurationsanleitung — Heidelberg (Amperfied) Energy Control
Version:2025.1.1