SimonsVoss SmartCD2.G2 Kurzanleitung Seite 27

Programming device
SmartCD2.G2
9
Operating via Bluetooth interface
NOTE
USB cable and Bluetooth connection cannot be used at the same
time
A plugged-in USB cable may deactivate the Bluetooth interface, de-
pending on the firmware version (<9.10.4.47).

ü
1. Unplug the USB cable from the SmartCD2.G2.
2. Press the button once when the top LED flashes.
EN
The programming device is ready for use.
Unplug the USB cable to operate via Bluetooth.
SmartCD2.G2 is charged (see
9 The top LED lights up continuously and does not flash.
}
Recharging [ 25] ).
6. Getting started
27 / 112