SimonsVoss SmartCD2.G2 Kurzanleitung Seite 24

4. Unpacking
Damage due to unsuitable cables
Defective USB cables may cause malfunctions.
Use only the supplied USB cable.

4. Unpacking
Scope of

delivery


You need the AXM/LSM software to operate the SmartCD2.G2.
To program on-site using a mobile device, make sure the LSM Mobile
software or app is installed.



https://www.simons-voss.com/en/service/software-downloads.html
24 / 112
SmartCD2.G2 programming device, including permanently built-in
batteries
Cable to connect to a USB port
Quick guide
The LSM Mobile software must be purchased separately.
The app is free of charge. You need the export tool included in the
LSM Mobile PC to use the app.
Transponders cannot be programmed with LSM Mobile, only via
AXM/LSM.
Programming device
SmartCD2.G2
EN