Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4
Filter
5.
Open the filter cover and remove the filter from the
robot.
5
6.
Remove all dirt from the filter and rinse it with clean
water using a hose. If the filter is very dirty, clean it with
soapy water and a soft brush.
6
7.
Reinsert the filter into the robot and close the lid
properly for the next cleaning process. Place the robot
in a dry place and allow it to dry completely. Do not
expose the robot to direct sunlight.
Maintenance and upkeep
Filter basket (replace if necessary)
1.
Turn off the robot. Open the filter cover and remove the
filter basket..
2.
Twist and remove the propeller cover, then use a small
knife or other tool to remove the tangled hair.
3.
Replace the propeller cover and twist it to secure it.
Propeller cover (clean if necessary)
Please charge the battery to at least 60~80% before long-
term storage.
Recommended storage temperature: -5 ~ 35°C (23 ~
95°F).
For optimal battery life, recharge at least every 6 months.
Long-term storage
1.
Open the filter covers and remove the filters from both
sides of the robot.
2.
Insert the new filters.
3.
Carefully close the filter covers.
4.
It is recommended to clean the filter basket after each
cleaning cycle.
F1SONIC PRO ROBOTIC POOL CLEANER
EN
5
Werbung
