Werbung
Error Codes
If an abnormality comes up, the hob will enter the protective state automatically and display the corresponding
protective codes:
Code
Possible causes
H
Hotplate surface is too hot
The material, size or position
of the pot does not meet the
heating requirements
E1: voltage is too low
E1/E2
E2: voltage is too high
E3
Surface sensor open- or short-circuited
E4
IGBT sensor open- or short-circuited
E5
Surface overheat protection
E6
IGBT overheat protection
The control panel is not connected.
E8
The above is the judgment and inspection of common failures.
Please do not attempt to disassemble the unit yourself to prevent any potential dangers or damage to the hob.
Technical Specification
Model
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size L×W×H
Building-in Dimensions L×W
Weight and Dimensions may vary due to improvement. We may change specifications and
designs without prior notice.
www.iamzchef.com Email: info@iamzchef.com Whatsapp: +1 (838) 910 8317 Facebook: amzchefappliance
English
FS-IRC119B33
2 induction zones
220-240V~ 50/60Hz
3300W
520mm×300mm×72mm
20.47"×11.81"×2.83"
(488~490)*(268~270) mm
(19.21~19.29)*(10.55~10.63) inch
69
Measures
Wait until it cools down.
Place the correct pan.
Check section Induction Cooking for details.
Check the power supply. Power on when
the power supply is normal.
Contact the supplier.
Contact the supplier.
Cool down the appliance before use.
Cool down the appliance before use.
Contact the supplier.
Werbung
