AEG Electrolux AU86050-6I Montageanweisung Seite 29

Two cabinet securing brackets are supplied with the installation pack.
They need to be assembled onto the cabinet prior to cabinet being
pushed into the Kitchen aperture.
To fit these brackets remove the two
1.
screws at the top left and right hand
front corners of the cabinet.
2. Position the two brackets
as shown in the figure and
replace the two securing
screws.
3. Push the appliance
into place. The plug
socket necessary for
connection of the
appliance to the elec-
tricity supply should
be positioned, so that
the plug is not placed
in the recess.
4. To adjust the height
proceed as follows:
Loosen or tighten the
two front feet.
The rear feet are adjusted by turning the screw in the front kick plate
to the left or right.
b)
Left hand bracket
2
Right hand bracket
29