AEG Electrolux AU86050-6I Montageanweisung Seite 27

Warning!
After completion of the door
reversing operation, check
that the door gasket adheres
to the cabinet. If the ambient
temperature is cold (i.e. in
Winter), the gasket may not
fit perfectly to the cabinet. In
that case, wait for the natural
fitting of the gasket or accel-
erate this process by heating
up the part involved with a
normal hairdryer on a low set-
ting.
Changing over the freezer compartment door
(not on all models)
Open the freezer compartment door a lit-
1.
tle way.
2. Using a small screwdriver, press the
spring in the opening of the lower door
bearing slightly upwards and take the
door bearing out complete with the
door.
27