VEVOR 6T Benutzerhandbuch Seite 6

OPERATING INSTRUCTION
Step1: Use a large pry bar or hydraulic jack to lift the equipment.
Step2: Place the industrial machinery movers at the bottom of the
equipment.
Step3: Ensure that the equipment is placed in the load-bearing center of
the industrial machinery mover.
Step4: When using this product, it should be moved slowly at a low speed,
as excessive speed can easily cause the movers to slide out.
NOTE: According to the different weights and sizes of the equipment to
choose the industrial machinery mover model,there are five styles to
choose from, as shown below (Show pictures are not product pictures, only
for example)
Fig.1
Fig.2 Fig.3
- 5 -