Keychron K3 MAX Benutzerhandbuch Seite 17

Reconnect to a Bluetooth Device
•
Move the toggle on the keyboard to the Bluetooth position.
•
The Bluetooth indicator will blink for 3 seconds and automatically reconnect to the last
paired device.
•
If the Bluetooth indicator is off, press any key to reactivate the connection.
Ensure the keyboard was previously paired with the desired device for this feature to
o
work correctly.
Wired Mode
For uninterrupted and stable performance, you can use the keyboard in wired mode:
•
Set the toggle to the Cable position. Note that wired mode only activates when the keyboard
is connected via a USB cable.
•
Use the included USB cable to connect the keyboard to your computer.
•
Upon connection, the backlighting will automatically turn on, providing visual confirmation.
Important: When in wired mode, the keyboard will not enter Battery Saver Mode.
Turn Off the Keyboard
To completely power down the keyboard:
•
Move the toggle to the Cable position.
•
Unplug the USB cable from the keyboard and power source.
This ensures the keyboard is off, conserving battery life during periods of inactivity.
Backlight and Operating System Settings
Backlight Settings
The Keychron K3 Max keyboard allows customization of backlight effects:
•
To cycle through various lighting effects, press the Fn + Q key combination.
•
When the backlight is on, you can press the Fn + Tab keys to toggle between brightness
settings or other lighting options.
These backlight settings enhance your typing experience in low-light environments while adding a
personal touch to your keyboard setup.
17