VEVOR 18150FTLB Benutzerhandbuch Seite 5

4.How to set a torque value
4.1 Pull back the locker to unlock the supplementary graduation.
Center line
Sup.Grad
Graduation Datum Line
Sup.Grad
Locker
4.2 Turn the Supplementary Graduation to set a torque(Combination of values on
the Main and supplementary graduations.
4.2.1 Turn Supplementary Graduation until 60N.m on Main Graduation close to
Graduation Datum Line. Now, torque is set at 60N.m。
4.2.2 Turn clockwise until 6 on Supplementary graduati on is aligned with Center
Line.Now Torque is set at 66N.m
4.3. Apply the socket on to a bolt head or nut.
4