Cleaning And Maintenance - Cecotec Proclean 5010 Flatbed Inox Bedienungsanleitung

Steps
The first sequence consists of running the microwave at maximum
1
power for 3 minutes.
1.1 To select the power level, press the corresponding button.
1.2 Adjust the cooking time by turning the Time/Weight knob.
The second sequence consists of running the microwave at low power
2
for 9 minutes.
2.1 To select the power level, press the corresponding button.
2.2 Adjust the cooking time by turning the Time/Weight knob.
3 Press the Start/Resume button to start the microwave.
Notes
When the first sequence is finished, the microwave will start the next sequence automatically.
A maximum of 4 sequences can be set per cooking.
3.11 Safety child lock
Use this function to lock the control panel when cleaning or to prevent children from using the
microwave without supervision. If you activate this function, all buttons will be inoperative.
Activating the safety child lock: press and hold the Pause/Cancel button for 3 seconds.
Deactivating the safety child lock: press and hold the Pause/Cancel button again for 3 seconds.

4. CLEANING AND MAINTENANCE

WARNINGS:
Disconnect the power cable from the socket before cleaning the appliance. Do not immerse in
water or any other liquid when cleaning.
If you do not clean the microwave regularly, its service life will be affected.
Do not use abrasive cleaning products or scouring pads to clean the microwave.
Do not remove the mica plate.
If you notice that the microwave is emitting unpleasant odours, follow one of the 3 cleaning
methods below:
A Place several lemon slices in a cup and heat them at high power for 2 to 3 minutes.
B Place a cup of red tea and heat it on high power.
C Put in some orange peels and heat on high power for 1 minute.
When you have finished using the microwave, wipe the inside surfaces that have come into
contact with food with a damp cloth to remove any residue and then dry them thoroughly.
PROCLEAN 5010 FLATBED INOX
ENGLISH
Display
100P
3:00
20P
9:00
61