cecotec PROCLEAN 5010 FLATBED INOX Bedienungsanleitung Seite 60

ENGLISH
Example: it is currently 12:30 and you want the microwave to start automatically at
maximum power for 9 minutes and 30 seconds at 14:20.
Steps
When the microwave is connected to the mains, the ":" symbol will
1
flash.
1.1 Press the Clock button.
1.2 Set the hour value using the Time/Weight knob.
1.3 Press the Clock button again to confirm the hour setting.
1.4 Set the minutes by using the Time/Weight knob.
Press the Clock button again or wait 5 seconds without performing
1.5 any operation for the setting to be confirmed. Once the setting is
confirmed, the minutes will stop flashing.
2 Select the desired option and cooking time.
2.1 Select the desired power by pressing the corresponding button.
2.2 Turn the Time/Weight knob to adjust the cooking time.
3 Press the Delay start button once to display the current time.
3.1 Set the hour value using the Time/Weight knob.
3.2 Press the Delay start button again to confirm the hour value.
3.3 Set the minutes by using the Time/Weight knob.
Press the Delay start button to confirm the setting. At this point, the
4 Delay start function will be activated. The microwave will start at
14:20.
You can check the start time of the Delay start function by pressing the
5
corresponding button.
3.10 Multi-stage cooking
Some recipes require cooking in several stages. You can schedule this process as follows:
Example: you want to cook the food at maximum power for 3 minutes and, after this time,
you want the microwave to operate at low power for 9 minutes. You will need to set up these
two sequences.
60
PROCLEAN 5010 FLATBED INOX
Display
：
00:00
12:00
12:00
12:30
12:30
100 P
9:30
14:20