cecotec CONGA WINROBOT EXCELLENCE 970 Bedienungsanleitung Seite 32

ENGLISH
3. Remove the safety pod
4. Take off power
NOTE: when the product shows red light and beeps, please check if the power adapter is con
nected correctly, when the power adapter is connected correctly, the product will show a blue
light and work; when the power adapter is connected correctly, and the product still shows a
red light, please use direction
from its current position, until the blue light shows up, press Start/ Pause key on the remote
control to make the product work correctly.
4. MAINTENANCE
When cleaning pad and bottom parts of the product, please switch off the product.
Clean cleaning pad: Turn the robot
in cool, clean water for 2 minutes. Handwash with mild detergent and lay flat to dry. Let it dry
completely before re- attaching
• Do not use a wet cleaning
32 CONGA WINROBOT
keys on the remote control
AND CLEANING
over and remove the cleaning
it to the robot.
pad on the robot or it may slip on the window.
EXCELLENCE 970
ooo
to operate the product
pad, soak the cleaning
and move it
pad