Werbung
4.
Install wall plate
using two lag bolts
10
. Tighten the lag bolts only until they are pulled firmly against the wall plate.
09
CAUTION:
Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts
10
.
NOTE: If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt and shifting the wall plate until level. Tighten the bottom lag bolt
10
when adjustments are complete.
Go to STEP 3 on PAGE 14.
4
09
09
10
10
11
Werbung
