Deerc D20S Gebrauchsanweisung Seite 8

OPERATION GUIDE
Pre-Flight Preparations >>
2.2
Arms
All arms of the drone are folded before the drone is packaged
unfold the front arms, then unfold the rear arms
09
at the factory. First,
2.2 Pre-flight Preparations > >
propellers
• Installation:
HEAD
A
The drone wil not fly un ess the correct
propeller is installed on the correct motor shaft.
Each prope ler is labeled with either an or 'B"
on it. Secure the prope ler onto the motor shaft
using screws, turning each screw clockwise.
• Please check that the propellers are properly installed and tightened before each flight.
Exercise caution whenattaching/ detaching the prope lersto preventany cuts or injuries.
• The propellers are installed before the drone is packaged at the factory.
OPERATIONGUIDE /
Removal:
Forpropeler removal, u se a screwdriver ( provid
ed) to rotate the screws counter clockwise and
remove the prope ers- Be sure to hold the motor
while detaching the propel er.
10