Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Sample recipe
Sports drink
Ingredients:
¡ 250 g honey (cold, 7-9 °C)
¡ 5 g cinnamon
¡ 200 g milk (warm, 65 °C)
Preparation:
¡ Add the honey and cinnamon to the
blender.
¡ Blend the ingredients for 5 seconds at
level
.
¡ Add the milk.
¡ Blend the ingredients for 5 seconds at
level
.
To-Go blender jug
→ Fig.
39
Troubleshooting
Troubleshooting
Troubleshooting
The appliance is not working.
The mains plug of the power cord is not
plugged in.
▶
Connect the appliance to the power
supply.
The circuit breaker in the fuse box has
tripped.
▶
Check the circuit breaker in the fuse
box.
There has been a power cut.
▶
Check whether the lighting in your room
or other appliances are working.
The status display (LED) flashes.
The lid or blender jug are not locked or
were removed during processing.
▶
Set the rotary switch to .
Place the blender jug on the main unit
1.
and turn clockwise until it engages.
Turn the lid in the direction
2.
gages.
a The colour of the lock indicator for the
lid changes from red to green.
Programme was cancelled using the rotary
switch.
▶
Set the rotary switch to .
Appliance has a humming sound.
The blade is blocked or stiff.
▶
Set the rotary switch to .
▶
Remove the blockage.
Appliance switches off during use.
Processing quantity is too big or
processing time was too long.
▶
Set the rotary switch to .
▶
Reduce the processing quantity.
▶
Allow the appliance to cool down to
room temperature.
The programme does not start.
The rotary switch is not set to .
▶
Set the rotary switch to .
The programme has been cancelled using
the programme button.
1.
Set the rotary switch to .
2.
Press the programme button for the re-
quired programme.
Liquid is leaking from the blade insert.
Seal between the blender jug and the blade
insert is missing.
▶
Fit the seal on the EasyClick blade in-
sert.
The assembled To-Go blender jug cannot
be placed on the main unit.
To-Go blade insert is not screwed on
correctly and the safety catch prevents it
from being put on.
▶
Turn the To-Go blade insert clockwise
as far as possible.
→ Fig.
The
up.
until it en-
Lid on To-Go blender jug is leaking.
Seal is missing from the lid.
▶
Insert the seal.
appliance
old
of
Disposing
Disposing of old appliance
appliance
old
of
Disposing
Unplug the appliance from the mains.
1.
Cut through the power cord.
2.
Troubleshooting en
21
and
markings must match
23
Werbung
