Rear Spacers; Levelling; Removing The Shelf Holders; Door Reversibility - AEG S70360KG2 Benutzerinformation

Rear spacers

In the bag with the documentation, there are
two spacers which must be fitted as shown in
the figure.
Slacken the screws and insert the spacer under the
screw head, then tighten again the screws.

Levelling

When placing the appliance ensure that it stands
level. This can be achieved by two adjustable feet
at the bottom in front.

Removing the shelf holders

Your appliance is equipped with shelf retainers
that make it possible to secure the shelves during
transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction of the
arrow (A).
2. Raise the shelf from the rear and push it for-
ward until it is freed (B).
3. Remove the retainers (C).

Door reversibility

WARNING!
Before carrying out any operations, remove the plug from the power socket.
Installation
1
3
A
B
C
33
2