Installation Instructions - Vevor Rws16000 Bedienungsanleitung

Installation instructions

FLUSH
1.
Connect the water
source to the inlet port
on the tank cap/head.
SET UP
1.
Connect the
water source to the
inlet port on the tank
cap/head.
2.
Connect a hose to the
outlet port on the tank
cap/head.A double female
garden hose connector is
included if needed.
2. Connect a hose to the outlet
port on the tank cap/head.A
double female garden hose
connector is included if
needed.
- 6 -
3.
Turn the water on and flush
the unit for 4 to 6 minutes. While
flushing, you might notice a
discoloration in the water, this is
normal because the resin is new
and will release particles on the
initial flush.After 4 to 6 minutes,
the water should beclear and
ready for use.
3. Connect the other end
of the hose to the inlet port
of your RV/trailer/boat.