VEVOR RWS16000 Bedienungsanleitung Seite 11

TROUBLESHOOTING
There's a leak on
the cap/head.
There's a leak on
the inlet/outlet.
Doesn't soften
water.
FAQ
0: What kind of salt is to be used?
0: Can this be used for spotless rinse
for car washes?
- Twist and tighten the cap/head properly.
- Replace the o-ring.
-Make sure that the fittings are properly connected. Add
a PTFE thread seal tape if needed.
-Check the quality of the water using the test strip. If the
water is hard, regeneration is needed.
- 9 -
A: Regular table salt.
A: Yes, but you still need to dry your
car with a cloth after washing.