4) If you are not holding the hairdryer in the hand:
take hold of the hairdryer with your hand on its handle . This means that you
will be touching the sensor field
If you put the hairdryer down for a short time, it will switch off automatically .
NOTE
►
The sensor-controlled cut-off is not suitable for switching off the hairdryer
permanently . If you are not using the hairdryer switch it off using the blower
level switch 6 .
5) Once you have finished using it, switch the appliance off by switching the
blower level switch 6 to "0" . The indicator lamp 5 goes out . Then remove
the plug from the wall socket .
Cold air level
With the cold air button 8
combination of blower and heat levels .
Ionisation function
This hairdryer is fitted with an ionisation function .
If hair is dried using a normal hairdryer, the hair becomes charged statically and
starts to "fly" .
The ionisation function ensures that this charging of the hair is neutralised and
cancelled . The hair becomes soft, supple, shiny and easier to style .
Please note, however, that the ionisation function will only work optimally if the
attachments (finger diffuser 9 / styling jet 1) are removed as the attachment
will interfere with the application of the ions to the hair . Therefore, use the hair-
dryer without attachments for maximum ionisation effect .
Drying and styling hair
■
To quickly dry hair, we recommend first of all using a high blower and heater
setting for a short period . After drying the hair, switch to a lower blower and
heat level to shape the hairstyle .
■
With the supplied styling jet 1 you can apply a directed airflow to shape
and style your hair . Fit the styling jet 1 by pushing it with light pressure onto
the hairdryer so that it snaps into place and sits evenly on the hairdryer .
If you no longer require the styling jet 1, wait until the appliance has cooled
down and pull it off with a downwards snapping motion:
SHTT 2200 B1
3 and the hairdryer will switch on .
you can produce a cooler air flow with any
GB │ IE
│
7
■