INKBIRD ITC-308 Bedienungsanleitung Seite 11

When the time interval
is larger than preset
refrigeration immediately;
two refrigeration
won't start refrigeration
Delay time will be calculated
refrigeration stops.
6.4 Temperature
When there is deviation
actual temperature,
align the measured
The corrected temperature
calibration plus corrected
positive value, 0 or negative value)
6.5 Display in Fahrenheit
Users can select display
temperature value according
setting is display with Centigrade
displaying with Fahrenheit
Attentions: when CF value changed,
will be recovered
07 Error Description
Sensor Fault Alarm:
when temperature
controller will initiate
actions. The buzzer will alarm, LED displays
alarm could be dismissed
solved, the system will return to normal working
Over-temperature
when measured temperature
(less than -500C /-580 F or higher than 120 oc/ 248 0F), the
controller will initiate
cancel all the actions.
HL. Buzzer alarm could be dismissed
When temperature
will return to normal working
between two refrigeration
delay, the equipment
when the time interval
is less than preset delay, the equipment
until preset delay is satisfied.
right after the moment
Calibration (CA)
between measured
use temperature
temperature and actual
is equal
value(corrected
or Centigrade
with Fahrenheit
to their own habit. Default
temperature
temperature
to factory settings.
sensor is in short circuit
sensor fault mode,
by pressing
Alarm:
exceeds
over-temperature
The buzzer will alarm,
returns to measuring
status.
9
operation
will start
between
of
temperature
calibration function
temperature.
to temperature before
value could be
unit (CF)
or Centigrade
value.
value, set CF value
all the setting value
or open loop, the
and cancel all the
ER. Buzzer
any key. After faults
mode.
the measuring
alarm mode, and
LED displays
by pressing any key.
range, the system
and
to
For
range