ULTIMATE SPEED OBDII USOBD A1 Bedienungsanleitung Seite 65

˜ Selecting the charging test
1 . Select Charging test .
2 . Confirm the selection .
˜ Conducting the charging test
INFO: Do not switch off the vehicle engine during the
test . Follow the on-screen guidance .
1 . Start the vehicle engine .
˜ Unloaded Test
1 . Press the accelerator and hold the engine speed
between 2,500–3,000 RPM for 10 seconds .
2 . Confirm: Press
The display
˜ Loaded test
1 . Turn on the headlights and the air conditioner at the
highest level . Keep the engine idle for 10 seconds .
2 . Confirm: Press
The display
INFO: The screen of the product may vary in different
EU countries .
64 GB/IE
.
5 ] [
shows Processing, please wait.
1 ] [
.
5 ] [
shows Processing, please wait.
1 ] [