ULTIMATE SPEED OBDII USOBD A1 Bedienungsanleitung Seite 55

Do not expose the product to:
− extreme heat or cold
− extreme temperature fluctuations
Failure to observe this advice could lead to condensation
forming . Wait until the product has reached temperature
of the room before you use it .
Before inspection, read the manufacturer's instructions for
the respective battery .
Engine parts become very hot when the engine is
running . Avoid contact with hot engine parts to prevent
severe burns .
When the engine is running: Be cautions when working
around:
− the ignition coil
− the distributor cap
− the ignition wires
− the spark plugs
These parts are high voltage components that can cause
electrical shock .
Always block the drive wheels . Never leave a vehicle
unattended while testing .
Do not allow water or moisture to enter the product .
Fuel and battery vapours are highly flammable . Do not
smoke near the vehicle during testing .
m WARNING! Before starting the engine for testing
or trouble shooting, always make sure the parking
brake is firmly engaged . Put the transmission in neutral
transmission .
54 GB/IE