Azdome M01 Bedienungsanleitung Seite 4

USING YOUR DASH CAM
Tips:
Westrongly recommendthat pleaseformat your memory card beforeusing it at the first time
by camera'ssystemsettings.Batteryis mainly usedto savefiles in emergency.Please always
connect Dash Cam to external power while it is in use.
1. Auto power ON/OFF:
(DConnectthe car chargerand DashCamby usingthe chargingcable.
@plugthe other end of the carchargerto your vehicle'scigarettelighter socket.
@whenthe car engineis started,DashCam automaticallyturns ONand start recording.When
the car key is turned to LOCK position, Dash Cam automatically saves the recording and turns
OFF within few seconds.
2. Manual power ON/OF
• ToManuallyTurn ON:pressthe powerbutton once.
• ToManuallyTurn OFF: p ressand holdthe power button for at least2 seconds.
FORMAT THE MEMORY CARD
I.Press to enter setting interface.
2.Press A / V to locate Micro SD card setup, press to enter Micro SD card format.
3.PressA / V to locate "0K", press
MENU SETTING
I.Press Ä to enter menu setting.
2.PressA / to locatethe itemyou want to set,
3.Press to confirmyour setting.
4.Press again to exit menu setting,
Note: Please setthe right time beforeusingthe dashcam.
WORKING MODES
Video Mode
I.Press M to select video mode, a video icon will appear in the left top corner.
2.Press to start recordingwith the working indicator flashingblue.
Photo Mode
I.Press M to selectphoto mode,a photo icon will appearin the lefttop corner,
2.Press Buttonto take photoswith the screenflashingonce.
EN-04
to confirm formatting.
Playback Mode
1,Press M to enter playbackmode, a playbackiconwill appearin the left top corner.
2,Press A / to selectfiles. Pressand hold during fast forward to low the fast forward
speed.pressand hold to fastforward.
to play / pausethe selectedfile,
3.Press
4,Press M one moretime to exit playback,
Mode
Connect the dash cam to computer with a Mini USB cable to view your files on computer.
Charging
Charge via a car poweror IJSgpower adapter.Thechargingindicator will light up in redwhen
chargingandturn off when fully charged.
BUTTON CONTROLS
Button
Operation and Function
I.Select function options in setup mode
2Select previous video in playback mode
Press once to enter menu setting
(disabledin recordingmode)
ISelect function options in setup mode
ISelect nextvideo in playbackmode
I.In recordingmode, pressonceto start recording,pressone moretime to
stop recording.
0K
2.Pressonceto shoot photos.
3.Pressonceto confirm your setting in setup mode.
I.Press once to shift between recording/ taking photos / playback modes.
2.Press once to return to previous page in playback mode.
In recording mode, press once to lock the video as an emergency one.
I.Press once to turn on the device
2.Press once to lock the screen
3.Press and hold to turn off the device
Reset Reboot the device
EN 05