Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5 Device description
5.1 Front panel
Nr.
Name
Description
POWER LED
Lights up permanently when the device is powered.
1
STATUS LED Flashes when the device works normally.
2
> Lights up permanently when HDCP-protected content is transmitted.
HDCP LED
> Flashes if no HDCP-protected content is transmitted.
3
> No light when no content is transmitted.
LINK LED
Lights up permanently when the HDBT link was successful.
4
Change functionality of the RS232 port:
RS232 DIP
> PASS-THROUGH (Default): RS232 pass-through via HDBT.
5
switche
> MCU: RS232 port is used for updating the MCU firmware of the receiver.
> VS: RS232 port is used for updating the HDBT firmware of the sender and receiver.
5.2 Rear panel
1
No. Name
Description
12V
Power input (optional)
1
HDBT IN
RJ45 input for connection with the HDBT output of the transmitter.
2
RS232
Connection of an external media control system or firmware updates.
3
HDMI OUT
HDMI output.
4
3.5 mm jack output for connection to speakers.
AUDIO OUT
5
Outputs the de-embedded audio signal from the HDMI output.
USB 2.0 Type-A sockets for connecting USB devices.
USB DEVICE
6
Note: The upper ports have 1,4 A, the lower ports 0,6 A.
14
1
2
3
4
2
3
4
5
5
6
EN
Werbung
