Herunterladen Diese Seite drucken

Kindermann HDMI-HDBT 2.0 Extender-RX Inbetriebnahme- Und Bedienungsanleitung Seite 13

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4 Introduction
The HDMI-HDBT 2.0 Extender - RX is an HDBaseT 2.0 compatible receiver with PoH support, which
receives signals up to 40 m distance via CAT 6a/7 cable and converts them back to HDMI.
The transmission of USB and RS232 signals is also supported.
4.1 Features
> HDMI 1.4 with 4K@60Hz 4:2:0 8bit and HDCP 2.2 compatibility.
> Receives 4K signals up to 35 m and 1080P signals up to 60 m over a single Cat 5e/6 cable.
> Receives 4K signals up to 40 m and 1080P signals up to 70 m over a single Cat 6A/7 cable.
> 2x USB Type-A sockets with 0,6 A.
> 2x USB Type-A sockets with 1,4 A.
> Supports single-sided PoH, the receiver can be powered from the connected transmitter.
> Supports USB and RS232 pass through via HDBT port.
4.2 Scope of delivery
> 1 x HDMI-HDBT 2.0 Extender – RX
> 2 x Mounting brackets (with screws)
> 1 x 3-Pin Euroblock
> 1 x Commissioning and operating instructions
4.3 Customer service
Kindermann provides three years of warranty for this product. Please check our warranty terms for more
details.
Note: Please contact your integrator immediately if any damage or defect in the components is
found.
EN
13

Werbung

loading

Diese Anleitung auch für:

7488000097