Up A Conference Call; On Hold; Activate The Conference; Adding Calls To The Conference Call - LG G7050 Benutzerhandbuch

35 34
Multiparty
or
conference calls
The
multiparty
or
conference service
provides
you with the
ability to
have
a
simultaneous conversation with
more
than
one
caller, if your
network
operator supports
this feature. A
multiparty
call
can
only
be
set
up when you have
one
active call and
one
call
on
hold, both
calls
having
been answered. Once
a
multiparty
call is
set
up, calls
can
be added, disconnected
or
separated (that is, removed from
the multiparty call but still connected to you) by the person who set
up the
multiparty
call. These
options
are
all available from the In-
Call
menu.
The maximum callers in
a
multiparty call
are
five. Once
started,
you
are
in control of the multiparty call, and only
you
can
add callers to the
multiparty
call.
Making
a
second call
You
can
make
a
second call while currently
on a
call. Enter the
second number and press the
key.
When the second call is
connected,
the first call is
automatically placed
on
hold. You
can
swap between calls
by pressing
the left soft
key
then
selecting
Swap.
Setting
up
a
conference call
Place
one
call
on
hold and while the active call is
on,
press the left
soft key and then select Conference/Join all.
Putting
a
conference call
on
hold
Press the left soft key, then select Conference/Hold all.
Activate the conference call
on
hold
Press the left soft
key,
then select
Conference/Join
all.
Adding calls to the conference call
To add
a
call
to
an
existing
conference
call,
press the left soft
key,
then select Conference/Join all.
Displaying
callers in
a
conference call
To scroll through the numbers of the callers who make up
a
conference call
on
the handset
screen, use
the
up/down navigation
keys.
Taking
a
private
call
during
a
conference
call
To have
a
private
call with
one
caller from
a
conference call,
display
the number of the caller you wish
to
talk
to
on
the
screen,
then press the left soft
key.
Select
Conference/Private to put
all
the other callers
on
hold.
Ending
a
conference call
The currently displayed caller from
a
conference call
can
be
disconnected by pressing the key. To end
a
conference call,
press the left soft
key,
then select Conference/End
multiparty.
After
pressing
the left soft
key, selecting Conference/End
all will
end all the active and on-hold calls.
General functions General functions