Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Adjust the thickness using the "+" or "-" buttons. The higher the number of
bars, the lower the temperature.
6. Press the start button to start the machine. The child lock will activate after
1 minute of inactivity. To deactivate, press and hold the child lock button for
3 seconds.
AFTER PREPARATION
• Once the slush is ready, the machine will alert you with a buzzer sound.
Pull the handle down to pour your drink.
TIMER FUNCTION
Use the timer function to delay the start of the machine.
1. Choose your desired preset and thickness.
2. Press the timer button, adjust the time using the "+" and "– "buttons, and
press the start/pause button to begin the countdown. The startup can be
delayed by up to 24 hours.
3. To cancel the timer, press the start/pause button.
4. You can modify the settings and time anytime. Simply unlock the child lock
and adjust with "+" and "– "buttons.
CLEANING AND MAINTENANCE
CLEANING STEPS
1. After use, pour clean water (water temperature not exceeding 50°C) into the
tank.
2. Select the "Clean" mode to initiate cleaning.
3. Drain the water and repeat if necessary.
4. Disassemble and clean the parts.
• The tank, stirring blades and water tray can be cleaned in the dishwasher.
We recommend placing the parts on the top rack in the dishwasher.
• Use a damp soft brush or cloth to clean the evaporator and the sealing
ring at the rear of it.
5. Ensure all parts are completely dry before reassembling.
Caution: Do not immerse the appliance, cord, or plug in water or any other
liquid.
STORING
• Ensure the machine is thoroughly cleaned, with no residue remaining, before
storing.
• Store it upright and in a dry and safe place.
11
EN
Werbung
