Uppababy RUMBLESEAT V3 Bedienungsanleitung Seite 23

EN
Europe
DO NOT allow child to stand while in the RumbleSeat.
Accessories other than those approved by UPPAbaby should not be used.
Use only replacement parts supplied or approved by UPPAbaby.
DO NOT make any alterations or modifications to the stroller with products not
supplied by the manufacturer as this may cause instability or structural damage not
covered under warranty.
Bumper bar must be attached at all times.
DO NOT lift the stroller by the bumper bar as it may disengage.
NEVER leave child in the product while ascending or descending stairs, or using an
escalator.
Children should not be left unattended in the product with rain shield fitted.
The stability of the product will be impaired in high winds with the rain shield fitted
and should be steadied by an adult at all times.
Rain shield must be removed when indoors and in hot weather to prevent
overheating and possible risk of suffocation.
Before each use, inspect your adapters to make sure they are fully engaged with the
stroller and seat.
Always push the pushchair with both hands when using the RumbleSeat.
DO NOT lean or press on the RumbleSeat with excessive force.
Stroller can fold with adapters attached, however, the RumbleSeat must be removed
and the main seat must be facing forward and in an upright position.
Complies with EN 1888-1 and BS EN 1888-1
21