DJI MATRICE 4D Serie Kurzanleitung Seite 2

Charging
• Charge the remote controller to activate the internal battery before using for the first time.
Preparing the Aircraft
Power on:
Press, and then press and hold the power button.
• The devices require activation before first use. Make sure the remote controller is connected to the internet and follow the instructions in the app for activation.
• When using with the dock, refer to the manuals in the dock package to complete installation, preparation, linking, and activation.
Preparing the Remote Controller
• DO NOT operate other wireless devices at the same frequency as the remote controller, to avoid signal interference.
Start (Stop) Motors
Perform Combination Stick Command and hold for two seconds.
Take off
• Always set an appropriate RTH mode and RTH altitude before takeoff.
• Press the Flight Pause button
Land
for emergency braking during flight.
Linking and Activation
Matrice 4TD
Matrice 4TD
Max Altitude: 197ft Not Logged In
UTMISS RID
Max Altitude: 197ft Not Logged In Max Altitude: 197ft
UTMISS RID UTMISS RID
Click
Click
Max Altitude: 197ft Not Logged In
UTMISS RID
Not Logged In
LINKING
LINKING
Manual Flight
5s
5s