Forced Start Mode; Settings Mode - Autool Em385 Bedienungsanleitung

Forced start
mode

Settings mode

Programmable
Power Supply
Vehicle
Display Mode
Voltage (V)
14.0V
●
Connect the battery clamps to the car's positive and negative
terminals.
●
Select "Forced Start," confirm, and click "OK." The interface
will prompt "Please start the vehicle." When the current
exceeds 50A, the interface will automatically switch and
display the starting voltage and current.
● When starting the car, if the current exceeds 400A for 500
milliseconds, protection will be triggered, interrupting the
output. Press the "OK" button to resume operation.
Programmable
Power Supply
Vehicle
Display Mode
Please start the vehicle
●
Set the product settings and prompt settings. Product settings
allow you to adjust the system language, button sound, screen
brightness, and view device information. Prompt settings allow
Fast Battery
Charging Restoration
Forced
Settings
Start
Fast Battery
Charging Restoration
Forced
Settings
Start
22
Please confirm that the
battery voltage is within
the compatible range.
(9~16V)
Voltage (V)
13.4
Current (A)
3.1
Charging
Progress (%)
15
1. Please ensure the battery clamps are
connected correctly: red wire to +,
black wire to -.
2. Please confirm that the starting
current is within the compatible
range of 400A.
Voltage (V) Current (A)
Stop