Battery Restoration Mode; Vehicle Display Mode - Autool Em385 Bedienungsanleitung

Battery
restoration
mode
Vehicle
display mode
Voltage (V)
●
A severely discharged battery needs to be restored before it
can be charged normally.
Programmable
Power Supply
Vehicle
Display Mode
Voltage (V)
13.4
Current (A)
3.1
●
Set the charging voltage within the range of 9.0V to 16.0V. In
standby mode, a small current float charge is applied to the
battery. When detecting battery discharge, the current can be
output up to a maximum of 40A. If the set voltage is lower than
the battery voltage, the system will automatically set the
charging voltage to: battery voltage + 2V.
Current (A)
Voltage (V)
13.4
Fast Battery
Charging Restoration
Forced
Settings
Start
Time (S)
236
Temperature (°C)
30
21
Please select the appropriate voltage
and current according to actual needs.
Incorrect selection may result in
damage to the electrical equipment.
Please pay special attention!
Current (A)
4.0
The battery must be
removed from the vehicle
before restoration
Restoration Completed