Yoer PAC02W Bedienungsanleitung Seite 53

TROUBLESHOOTING
Problem
The device does
not work
The air
conditioner
works only for a
short time
The cooling
mode does not
work properly.
The device does
not generate
cool air.
The device does
not generate
cool or/and
warm air.
Heating mode
does not work
properly
Possible cause
The power cable is disconnected
from the socket.
The water tank is full. The
indicator flashing on the panel
signalizes it.
The air exhaust pipe is blocked.
There are bends or kinks in the air
exhaust pipe.
The device is exposed to direct
sunlight.
Doors or windows are open; There
are other heat sources in a room.
The filter is dirty.
The air inlet or outlet is blocked.
While using the cooling mode, the
room temperature is lower than the
chosen temperature;
Lack of refrigerant.
The device is damaged.
The device is damaged.
While heating mode, the room
temperature is higher than chosen
temperature.
ENGLISH
Connect the power cable to
the socket.
'
Empty the water tank.
Check and remove the
obstacles obstructing air
discharge.
Mount the air exhaust pipe
correctly, keeping free of
bends and kinks.
Keep the device away from
direct sunlight.
Close the doors and windows;
move the device away from
other heat sources.
Clean the filter.
Check and remove the
obstacles obstructing air
discharge.
Change temperature settings.
Contact Yoer service.
Contact Yoer service.
Contact Yoer service.
Change temperature settings.
53
Solution