Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TROUBLESHOOTING GUIDE (continued)
For Model FP638:
TROUBLE
Fog or moisture
• Condensation due to ambient
inside the filter
gauge window
Filter cartridge
• Inlet and outlet are closed.
is dirty, but the
• Filter cartridge not correctly
indicator is in the
green zone
• Incorrect filter cartridge
• Filter cartridge is broken and
• Accessories attached to the
• Hoses are twisted, kinked or
• The filter gauge is broken.
After cleaning the
• Filter cartridge is not completely
cartridge, the
indicator is still in
• Filter cartridge cannot be
the yellow zone
• The filter gauge is broken.
Filter cartridge
• There may be algae clogged
seems clean, but
inside the filter cartridge.
the indicator in the
• The filter gauge is broken.
red zone
Filter gauge
• Filter gauge not reseted after
indicator stuck in
cleaning or replacing the filter
yellow or red when
cartridge.
pump is off or after
• The filter gauge is defective.
changing a new
filter cartridge
S AVE THESE INSTRUCTIONS
(58) MODEL FP604&FP638 FILTER PUMP ENGLISH SIZE: 4.875" X 7.25" PANTONE 295U 05/20/2024
CAUSE
temperature variation and high
humidity level.
installed inside the filter housing.
specification.
leaking.
water filtration system line.
tangled.
clean.
cleaned.
Page 10
SOLUTION
• This is normal.
• Remove the black hat-like plugs from the
inlet and outlet strainer connectors.
• Make sure the cartridge is installed
correctly inside the filter housing and the
housing cover is securely closed.
• Replace with INTEX filter cartridge.
• Replace the filter cartridge with a new one.
• Remove any accessories (skimmer,
lights, water sprayer, auto cleaner, heater,
sanitation, vacuum device, etc) from the
filtration inlet and outlet line.
• Make sure all the hoses are fully extended.
• Replace a new filter gauge.
• Soak and clean the cartridge thoroughly
again. Use a brush to clean between the
pleats.
• Replace with a new filter cartridge.
• Replace a new filter gauge.
• Soak and clean the cartridge thoroughly. If
it's still in the red zone, replace with a new
filter cartridge.
• Replace a new filter gauge.
• Press the button under the filter gauge to
reset it (back to green) after cleaning or
replacing a new cartridge.
• Replace a new filter gauge.
58
English
A
Werbung
