Choosing The Program; Changing The Program - AFG GSM610 Bedienungsanleitung

AfG
When the door is closed again, the system offers the last program run.

8.4 Choosing the program

SYMBOL
Short
Medium
Long
(*) The cycle duration stated above is guaranteed if the appliance is connected to hot water > 50°C <60°C
If the dishwasher is supplied with cold water, the cycle duration might increase depending on the intake water temperature
and the "Thermostop" setting.

8.5 Changing the program

If a programme is already running, it can be changed by first switching the appliance to pause status (by pressing one of the
buttons for 2") and then selecting the programme required.
Glasses
Cutlery
Use the basket provided. Load cutlery loose, preferably with the handle at the bottom, taking care not to injure yourself with
fork prongs or knife blades.
PROGRAM
Load glasses upside down.
GSM610
Unload the dishes
TYPE OF DIRT
Glasses and cups
Glasses, cups and plates with light dirt
Very dirty dishes and cutlery
If the master switch is not turned off, the appliance sets on the last
programme performed. To change it, press the key of the program
required; the Led comes on.
To confirm hold down for about 2". The Led starts to flash and the
washing programme starts.
16
DURATION (*)
1"
2"
3"