Options - Electrolux TTC1004 Benutzerinformation

12 www.electrolux.com
How to deactivate AutoOpen
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
start flashing and the display is blank.
2. Press
• The indicators
are off.
• The indicator
• The display shows the current
setting:
3. Press
= AutoOpen deactivated.
4. Press on/off to confirm the setting.
6.7 MyFavourite
This option allows to set and save the
most frequently used programme.

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
7.1 XtraDry
Activate this option when you want to
boost the drying performance. With use
of this option, the duration of some
programmes, water consumption and the
last rinse temperature can be affected.
and
, , ,
.
, ,
still flashes.
= AutoOpen activated.
to change the setting:
It is possible to save only 1 programme.
A new setting cancels the previous one.
How to save the MyFavourite
programme
until
1. Set the chosen programme.
and It is also possible to set applicable
options together with the programme.
2. Press and hold
indicator is on.
and
How to set the MyFavourite
programme
Press
• The MyFavourite indicator is on.
• The display shows the number
and the duration of the
programme.
• If options are saved together with
the programme, the indicators
related to the options are on.
The XtraDry option is a permanent option
for all programmes other than ECO and
need not to be selected at every cycle.
Every time ECO is activated, XtraDry
option is off and needs to be chosen
manually. In other programmes, the
setting of XtraDry is permanent and it is
automatically used in next cycles. This
configuration can be changed at any
time.
Activating XtraDry option deactivates
TimeManager.
How to activate XtraDry
Press
on.
If the option is not applicable to the
programme, the related indicator does
not appear or it flashes quickly for a few
seconds and then goes off.
The display shows the updated
programme duration.
until the related
.
. The related indicator comes