BWT ES600 Bedienungsanleitung Seite 7

1. Remove and clean the filters.
2. Inspect filters for holes; if damaged, replace them.
Blocked or damaged propeller
ƒ
1. Unscrew the outlet locker on the top outlet.
2. Inspect the propeller and clean or replace if
needed.
Cleaner Does Not Cover the Entire Pool
Possible causes and solutions:
Clogged filters
ƒ
1. Remove and clean the filters.
Insufficient cable length
ƒ
1. Ensure there is enough floating cable to reach all
areas of the pool.
2. Check that the cable is properly spread out and not
tangled.
Blocked or damaged propeller
ƒ
1. Unscrew the outlet locker on the top outlet.
2. Inspect the propeller and clean or replace if
necessary.
Cleaner Does Not Climb Walls
Possible causes and solutions:
Dirty filters
ƒ
1. Remove and clean the filters.
Blocked or damaged propeller
ƒ
1. Unscrew the outlet locker on the top outlet.
2. Inspect the propeller and clean if needed.
By following this troubleshooting guide, you can
ensure that your robotic pool cleaner functions
optimally for the best cleaning performance.
ES1500 ROBOTIC POOL CLEANER
EN
7