BWT ES600 Bedienungsanleitung Seite 5

Maintenance and Storage
Cleaning the Filters To maintain optimal performance,
the filter(s) must be cleaned after each cleaning cycle.
Follow these steps:
1. Press the release button to open the lid.
2. Carefully remove the filter(s) from the unit.
3. Rinse the outer side of the filter with clean water.
4. Spray water from the inner side to flush out all dirt
and debris.
5. Once clean, reinsert the filter(s) securely back into
the unit.
Checking & Cleaning the Water Outlet Propeller
For optimal efficiency, periodically inspect and clean
the water outlet propeller to remove hair, dirt, or
debris:
1. Unscrew the outlet locker securing the outlet cover.
2. Remove the water outlet cover carefully.
3. Clear any debris or hair from the propeller.
4. Reattach the outlet cover and secure the locker.
Note: The unit may feature single or double filters,
depending on the model.
By following these maintenance steps, you ensure that
your robotic cleaner operates at peak performance
and enjoys a long service life.
Storing the Pool Robot
To ensure the longevity of your robotic cleaner, follow
these storage steps:
1. Disconnect the power cord from the wall outlet.
2. Unplug the floating cable from the power supply.
3. Ensure the power supply is kept dry and away from
water.
4. Straighten and loosely roll the floating cable to
avoid tangles.
5. Rinse the interior and exterior of the cleaner with
fresh water.
6. Allow the unit to dry completely before storing.
7. Gently roll the floating cable and place it on top of
the cleaner.
8. Store all components in a dry, enclosed location to
prevent damage.
Caution: Storing the cleaner or its components in
damp or exposed environments may result in damage.
ES1500 ROBOTIC POOL CLEANER
EN
5