Baseus BPE45C Bedienungsanleitung Seite 9

5. Instructions
Note: The following instructions assume that the APP has been connected to the product. If the connection is broken or
the distance between them is too far (over 10 meters), the APP may not be able to instantly respond or issue reminders
or alerts timely, affecting user experience. It is recommended to use the product while keeping the APP on and keep
them close for smoother use.
1. Start/shutdown
Press the power button for 2sto turn on the product,the powerindicator lightsup, screenprompts to enter standbymode
n the power-on state, press and hold the power button for 2 seconds to turn it off with the power indicator off.
Press and hold the button
seconds to turn it on/turn it off
The default standby time of this product is 15 minutes. If the inverter switch/LED light switch is off and the product has no load
accessed, t he product will automaticallyturn off in 15minutes.
2. How to charge a device
1) Chargea devicevia a USB/Type-C/DC port
* After the product is turned on, the USB/Type C/DC port will enter the standby mode and can be used to cha ge cell phones or
other digital productswith compatibledata cables.
Meanwhile, the main screen will display al parameters for reference, including the current total output power, current
temperature, remaining battery evet,and remaining dischargetime underthe current output power.
2) Charge a device via the AC port
* After the product is turned on, press and ho d the AC output button for 2 seconds to enable AC inversion output, with the
ACoutput indicator on. Now you can plug in and charge an AC device.
* Under the ACoutput state, press and hold the AC output button for 2 seconds to disable AC inversion output, with the AC
output indicator off.
Warning: There isa high voltage output after the AC inversion output is enabled. Please do not plug metal or
LA conductive objects into the ACmain socket to avoid electric shock.
for 2
3
Main interface