Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Overview
Contents
Summary
Function
Installation
Startup
Servicing
Important notes
The light-fuel-oil burners EK03B.24 L-Z
and EK03B.30 L-Z are designed to run
on extra-light fuel-oil.
The design and function of these
burners both conform to EN 267
standards.
All installation, initial-startup and
maintenance work must be carried out
by authorised service engineers, who
should observe all relevant guidelines,
directives and specifications.
Description of burner
The light-fuel-oil burner EK03B.24/30 is
a 2-stage, full-automatic burner in
monobloc configuration. It is suitable,
when used within its operating range,
for fitting to heating boilers conforming
to EN 303 standards, and also for the
equipping of warm-air heaters
conforming to DIN 4794 or DIN 30697.
Scope of delivery
The burner is supplied with the
following items:
2
fuel-oil hoses
1
connection flange with Insulating
gasket
1
bag containing installation fittings
1
transparent envelope containing
technical documentation
16
List of contents . . . . . . . . . . . . . . . . . . 16
Important notes . . . . . . . . . . . . . . . . . . 16
Automatic control unit . . . . . . . . . . . . . . . 20
Options of connection . . . . . . . . . . . . . . . 21
Layout plant, connection base . . . . . . . . . . 22
Burner assembly . . . . . . . . . . . . . . . . . 23
. . . . . . . . . . . . . . . . . 24
fuel-oil supply . . . . . . . . . . . . . . . . . . . 24
Burner adjustment . . . . . . . . . . . . . . . . 27
Maintenance . . . . . . . . . . . . . . . . . . . 28
Troubleshooting . . . . . . . . . . . . . . . . . . 29
The following standards should be
observed in order to ensure safe,
environmentally sound and
energy-saving operation:
DIN 4755
Fuel-oil-fired devices installed in
heating systems
EN 226
Connection to heating systems of
vaporizing-fuel-oil and forced-draught
gas burners
EN 60335-2
Safety of electrical devices designed
for domestic use
Place of installation
The burner must not be operated in the
presence of corrosive fumes (e.g.
hairspray, tetrachloroethylene or
carbon tetrachloride), large amounts of
dust, or high levels of air humidity (e.g.
in laundry rooms). Ensure that a
ventilation inlet of the following
characteristics is provided:
up to 50kW: 150cm
-
for each additional kW: + 2,0cm
-
Rules may vary according to local
legislation.
0305 / 13 010 761A
Page
. . . . . . . . . . 17
. . . . . . . . . 18
. . . . . 19
We can accept no warranty liability
whatsoever for loss, damage or
injury caused by any of the
following:
-
-
Handover and operating instructions
The person engaged to install the firing
system must provide the user with
operation and maintenance instructions
no later than at the moment in which
the unit is handed over for use. These
instructions should be displayed in a
prominent location at the point of
installation of the heating unit, and
should include the address and
telephone number of the nearest
customer service centre.
Advice to the user
2
Have the system professionally
2
serviced at least once a year. Its is
recommended to enter into a
maintenance contract in order to
ensure trouble-free running.
Declaration of conformity for
forced-draught fuel-oil burners
We, CEB, of
F-74106 ANNEMASSE Cedex
declare under our sole responsibility
that the products
EK03B.24 L-Z
EK03B.30 L-Z
conform to the following standards
EN 50165
EN 55014
EN 60335
EN 60555-2
EN 60555-3
EN 267
In accordance with the stipulations of
European Directives
89 / 392 /EEC
industrial machines
89 / 336 /EWG EMC-directive
73 / 23 /EEC
low-voltage devices
directive
92 / 42 /EEC
working efficiency
These products bear the CE marking
Annemasse, May 1st 2003
J.HAEP
Unauthorised use - Incorrect
installation and/or
initial startup on the part of the buyer
or any third party, including the fitting
of non-original parts.
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
