cozze CG-PZ03A-3-BK Gebrauchsanweisung Seite 11

Warning: If the burner fails to ignite, turn the control knob off (clockwise) and also turn the
cylinder valve off. Wait five minutes before attempting to relight with ignition sequence. Or
change the AA batteries.
After use, close the gas supply by either turning 'OFF' the switch on the regulator or turning
'OFF' the cylinder valve.
In the event of light back whilst the appliance is in use. Turn the control, cylinder valve
and regulator switch to the 'OFF' position. Wait 5 minutes before attempting to relight the
appliance. If the problem persists after relighting, consult your gas dealer, or the store where
you purchased the pizza oven, or a qualified gas engineer for assistance or repair. Never try
to rectify the problem yourself as this could result in serious injury and/or property damage.
Clean the appliance of excess fat, before storage, with a damp cloth using a mild detergent
solution as the cleaning agent.
Store the appliance in a clean dry environment.
Do not store your gas cylinder indoors. Store in a well ventilated area away from direct
sunlight.
CONNECTING THE GAS CYLINDER TO THE APPLIANCE
Connect the hose and regulator assembly to the LPG cylinder. Only use a CE-approved
regulator and hose with a ¼" connector.
Carry out a leakage test using soapy water before using the pizza oven.
TO CHECK FOR LEAKS
Make 2-3 fluid ounces of leak detecting solution by mixing one part washing up liquid with 3
parts water.
Ensure the control valve is "OFF".
Connect the regulator to the cylinder and ON/OFF valve to the burner, ensure the
connections are secure then turn ON the gas.
Brush the soapy solution on to the hose and all joints. If bubbles appear you have a leak,
which must be rectified before use.
Retest after fixing the fault. Turn OFF the gas at the cylinder after testing.
If detected leakage can not be rectified, change the regulator and hose.
In the event of gas leakage, turn off the gas supply.
11