Electrolux EFCR942 Gebrauchsanweisung Seite 49

Installation
• Position the holing diagram to the wall at the
correct height (fig.7). The lower corner of the
diagram corresponds to the lower corner of
the aspiration hood
• There is a line on the holing template that
corresponds to the centre of the apparatus.
Trace a line up to the ceiling to facilitate the
installation of the hood (fig. 7).
• Make a hole, as indicated in the diagram and
insert two wall dowels, two hooks, and two
screws (fig. 7).
• Hang up the hood. Adjust the position with the
screws on the hooks of the hood (Fig. 8).
• Mark the points on the wall from inside the
hood, corresponding to the holes to use for the
definitive fixing of the hood (Fig. 9).
• Remove the hood.
• Make two holes (Ø 8mm) and insert two
dowels (Fig. 9).
• Hang the hood up again on the hooks.
• Insert the definitive fixing screws from inside
the hood (Fig. 9).
Fig. 7
Fig. 8
Fig. 9
9