Jaxmotech SEG MS 801 Bedienungsanleitung Seite 20

M To use the precision nozzle or diffuser, fit it to the hairdryer/adapter
attachment. You must hear and feel the nozzle or diffuser click into place.
M To remove the precision nozzle or diffuser, simply pull it off the hairdryer/
adapter attachment.
Switching on and setting the options
1. Insert the mains plug into a power socket
and push the On/Off sliding switch upwards.
2. Set the temperature by repeatedly pressing the
low temperature > medium temperature > high temperature > medium
temperature, etc.
3. Adjust the airflow by repeatedly pressing the
gentle airflow > medium airflow > high airflow > medium airflow, etc.
The indicator lights show the temperature and air speed settings you have set.
Temperature settings:
.
low temperature
..
medium temperature
...
high temperature
After switching off and on again, the most recent temperature and air
speed setting will still be set.
142722 en Multistyler v3.indd Druckbogen 10 von 10 - Seiten (10, 11) 142722 en Multistyler v3.indd Druckbogen 10 von 10 - Seiten (10, 11)
button:
button:
Air speeds:
.
gentle airflow
..
medium airflow
...
high airflow
10
Hairdressing
1. Style your hair as desired, e.g. as described under "Using attachments".
2. Allow your hair to cool down before combing it out carefully.
Cold air button
The cold air button is useful for cooling a strand more quickly. If you use the
precision nozzle, for example, you can dry specific sections of hair and then
cool them down more quickly using the cold air button. This cool-down effect
will make your hairstyle last longer.
M Press the cold air button to switch on the cold
air function.
All three temperature indicator lights will flash.
The temperature setting can no longer be
changed.
M Press the cold air button again to switch the cold air function off.
The previously set temperature setting will then be active again.
Changing attachments
1. After styling your hair, slide the On/Off switch downwards, disconnect the
mains plug from the power socket and allow the appliance to cool down
completely.
2. Pull the release button downwards, turn the
attachment anti-clockwise and remove it.
11
30.09.24 14:56 30.09.24 14:56