Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Restoring factory settings
10 Restoring factory settings
The factory settings of the
Homematic IP Combination Signalling
Device can be restored. The operations
differ as follows:
10.1 Restoring with battery operation
To restore the factory settings of the
Homematic IP Combination Signalling
Device, proceed as follows:
• Turn the device on its back.
• Open the battery compartment (F)
by pulling the latch back slightly
and remove the battery compart-
ment cover (I).
• Remove one battery from the bat-
tery compartment (F).
• Please wait a minute.
• Insert the battery in the
Homematic IP Combination
Signalling Device again, ensuring
that the polarity is correct, holding
down the system button (C) at the
same time for 4 seconds until the
LED (A) starts to flash orange fast.
Figure 4
• Release the system button.
• Press and hold the system button
again for 4 seconds until the LED
lights up green.
• Release the system button to
conclude restoring of the factory
settings.
• Close the battery compartment (F).
The device performs a restart and the
Homematic IP Combination Signalling
Device is reset. After the restart, you
can integrate your device into your
Homematic IP system again.
10.2 Restoring with mains power
supply
To restore the factory settings of the
Homematic IP Combination Signalling
Device, proceed as follows:
• Turn the device on its back.
• Open the battery compartment (F)
by pulling the latch back slightly
and remove the battery compart-
ment cover (I).
• Unplug the plug-in mains adapter.
• Please wait a minute.
• Plug the plug-in mains adapter into
the mains adapter socket (G) again,
holding down the system button
(C) at the same time for 4 seconds
until the LED (A) starts to flash
orange fast.
• Release the system button.
• Press and hold the system button
again for 4 seconds until the LED
lights up green.
• Release the system button to con-
clude the procedure.
The device performs a restart and the
Homematic IP Combination Signalling
Device is reset. After the restart, you
can integrate your device into your
Homematic IP system again.
22
Werbung
